STILL RX 70-70
A 7-tonne diesel forklift with an 80 kW Deutz TCD 4.1 engine and twin front tyres, for heavy loads at terminals, steelyards and building-material sites.
- 7 t at 600 mm load centre
- 80 kW Deutz TCD 4.1
- 3,150 mm standard lift
- Triplex masts up to 8,455 mm
Seven tonnes for heavy outdoor work
The RX 70-70 sits between the 6- and 8-tonne models in STILL’s heavy RX 70 line. It is rated for 7,000 kg at a 600 mm load centre and uses the same 80 kW Deutz TCD 4.1 engine and diesel-electric transmission as its siblings. Forks are 70 × 150 × 1,200 mm on an ISO class IV carriage. The standard telescopic mast lifts 3,150 mm from 2,710 mm lowered; triplex masts run from 4,705 mm to 8,455 mm.
Twin 8.25-15 superelastic front tyres carry the load, giving an overall width of 1,998 mm. The truck is 4,732 mm long and 2,697 mm high to the overhead guard, turns within 3,067 mm and weighs 11,370 kg. Top speed is 20 km/h and the fuel tank holds 110 litres. There is no LPG version at this size. Ask us about availability and the right mast for your site.
- 7 t at 600 mm: class IV carriage with 70 × 150 × 1,200 mm forks.
- 80 kW Deutz TCD 4.1: diesel-electric drive shared with the RX 70-60 and RX 70-80.
- Mast choice: 3,150 mm standard lift, triplex masts up to 8,455 mm.
Why choose the RX 70-70
Practical points taken from the VDI 2198 datasheet.
Twin front tyres
8.25-15 superelastic twin tyres spread the load on the drive axle.
Diesel-electric drive
The 4.1-litre engine powers electric traction, with a 20 km/h top speed.
Long working day
A 110-litre fuel tank for extended shifts on outdoor sites.
Working aisle
4,987 mm with 1,000 × 1,200 pallets crossways.
STILL RX 70-70 at a glance
| Specification | STILL RX 70-70 |
|---|---|
| Load capacity | 7,000 kg |
| Load centre | 600 mm |
| Drive | Diesel |
| Engine | Deutz TCD 4.1 |
| Engine power | 80 kW |
| Lift height | 3,150 mm (up to 8,455 mm with triplex mast) |
| Travel speed (laden / unladen) | 20 / 20 km/h |
| Tyres | Superelastic, twin front |
| Overall length | 4,732 mm |
| Overall width | 1,998 mm |
| Overhead guard height | 2,697 mm |
| Fork dimensions (s × e × l) | 70 × 150 × 1,200 mm |
| Turning radius | 3,067 mm |
| Service weight | 11,370 kg |
Figures refer to the standard configuration in the manufacturer datasheet. Masts, batteries and options change some values; we confirm the exact specification with you before quoting.
Other models in the range
RX 70-16
- Load capacity
- 1.6 t
- Lift height
- 3,230 mm
- Engine
- VW BXT
RX 70-20
- Load capacity
- 2 t
- Lift height
- 3,150 mm
- Engine
- VW BXT
RX 70-25
- Load capacity
- 2.5 t
- Lift height
- 2,970 mm
- Engine
- STILL DM02VB
RC 42-30
- Load capacity
- 3 t
- Lift height
- 3,300 / 4,700 mm
- Engine
- Mitsubishi S4S
RX 70-30
- Load capacity
- 3 t
- Lift height
- 2,970 mm
- Engine
- STILL DM02VB
RX 70-40
- Load capacity
- 4 t
- Lift height
- 3,180 mm
- Engine
- Deutz TCD 2.9 L4
RX 70-50
- Load capacity
- 5 t
- Lift height
- 3,180 mm
- Engine
- Deutz TCD 2.9 L4
RX 70-80
- Load capacity
- 8 t
- Lift height
- 3,150 mm
- Engine
- Deutz TCD 4.1
Interested in the STILL RX 70-70?
Tell us about your loads, lift heights and shift pattern. We will propose the right configuration for purchase, rental or a full-service agreement.
Request a Quote