AI Vision Blind Spot Detection System
Blind Spot Detection System (BSD)
AI-powered cameras scan the area around the truck continuously and warn the operator instantly, by sound and on screen, the moment a pedestrian or another vehicle comes too close.
- 270° coverage, expandable to 360°
- Tells pedestrians from vehicles
- Event recording
- IP69K
It steps in where the human eye cannot keep up
BSD (Blind Spot Detection) is an intelligent collision avoidance system that watches the blind areas around intralogistics trucks with AI-powered cameras. It recognises moving objects, distinguishes pedestrians from vehicles and warns the operator in real time.
The busier the traffic inside the warehouse becomes, the narrower the operator’s field of view gets. BSD is the driver’s second pair of eyes in that one second when attention slips.
- Coverage: Forklift trucks, reach trucks and pallet trucks.
- Graduated warning: Green, amber and red zones escalate the warning as the distance closes.
- Evidence: Event-triggered video recording makes every incident reviewable.

Blind spots invite accidents
Load height, narrow aisles and crossing routes: most accidents happen in a few seconds of lost visibility.
- Load height and narrow aisles restrict the operator’s view.
- Pedestrian walkways and truck routes often cross at the same point.
- One second of distraction or restricted vision can turn into an accident there is no coming back from.
- The cameras scan a 270° area around the truck without interruption.
- The AI recognises pedestrians and vehicles and warns the operator immediately.
- On suitable installations the truck speed can be reduced automatically.
Detect, warn, record
Expartise recommendation: three cameras and a monitor with recording, for the best balance of cost and performance. The system can be expanded to 360° as requirements grow.
Front cameras
Mounted symmetrically on either side of the mast, covering the front and the sides.
Rear camera
Mounted on the overhead guard, it closes the blind area when reversing.
AI analysis
The image is processed in real time and pedestrians are told apart from vehicles.
Warning and recording
The in-cab monitor gives an audible and visual warning and records the event.

What does the AI bring?
Designed specifically for the sight restrictions that come from the truck’s own structure and from a complex working environment.
Better forklift safety
Designed to remove the sight restrictions caused by the mast, the load and the overhead guard.
Proactive risk awareness
The operator sees a possible collision before it happens.
Uninterrupted event recording
High-capacity storage and event-triggered recording give you video evidence.
Reliable in tough conditions
IP69K protection and vibration resistance let it work indoors and outdoors.
Smart camera activation
The camera that matters comes to the front according to the direction of travel.
Sign recognition
Warehouse warning signs are recognised and can trigger an alarm or a slow-down command.
A BSD installation on site
The cameras are mounted symmetrically on the truck’s front mast, giving a field of view close to 270°.



One technology, many uses
Forklift Truck
Cameras mounted front and rear prevent collisions with pedestrians and vehicles.
Reach Truck / Pallet Truck
Gives blind spot warning in narrow aisles and at high stacking levels.
Junctions
Area-based warning where pedestrian walkways cross truck routes.
Mixed Fleets
Mounting points are adapted to each truck model, so the whole fleet can be covered.
Eliminate blind spots.
- Pedestrians and vehicles are spotted before a collision happens.
- Incidents are recorded with video evidence.
- The system expands to 360° as your requirements grow.
As an authorised STILL Arser service partner we run the whole process from a single point of contact: site analysis, installation, operator training and after-sales support.










