STILL RX 70-30
STILL RX 70-30
A 3-tonne diesel forklift with a 45 kW STILL Stage V engine and class III fork carriage, for heavier pallets in yards and loading areas.
- 3 t at 500 mm load centre
- 45 kW STILL DM02VB diesel
- 2,970 mm standard lift
- 2,384 mm turning radius
Three tonnes for demanding outdoor work
The RX 70-30 uses the same 45 kW STILL DM02VB engine as the RX 70-25, certified to EU Stage V, but is rated for 3,000 kg at a 500 mm load centre. Forks grow to 50 × 100 × 1,000 mm on an ISO class III fork carriage, and the service weight rises to 4,362 kg. The standard telescopic mast lifts 2,970 mm from 2,175 mm lowered; HiLo and triplex options run up to 7,390 mm.
Overall length is 3,702 mm, width 1,199 mm and height to the overhead guard 2,190 mm. With a 2,384 mm turning radius and a 4,052 mm working aisle for 1,000 × 1,200 pallets crossways, it handles heavier loads without becoming unwieldy. Travel speed is 21 km/h laden or unladen. An LPG model, the RX 70-30 T, is also available. Tell us about your heaviest loads and we will confirm the right mast and capacity.
- 3 t capacity: 50 × 100 × 1,000 mm forks on a class III carriage.
- 45 kW STILL engine: DM02VB diesel meeting EU Stage V.
- Mast choice: 2,970 mm standard lift, triplex masts up to 7,390 mm.
Why choose the RX 70-30
Practical points taken from the VDI 2198 datasheet.
Heavier pallets
3,000 kg at 500 mm with stronger 50 mm forks.
Stage V diesel
The 2.4-litre DM02VB engine meets EU Stage V emission limits.
Controlled footprint
3,702 mm long with a 2,384 mm turning radius.
Diesel or LPG
The RX 70-30 T uses a 36 kW STILL PM02V engine on LPG.
STILL RX 70-30 at a glance
| Specification | STILL RX 70-30 |
|---|---|
| Load capacity | 3,000 kg |
| Load centre | 500 mm |
| Drive | Diesel |
| Engine | STILL DM02VB |
| Engine power | 45 kW |
| Lift height | 2,970 mm (up to 7,390 mm with triplex mast) |
| Travel speed (laden / unladen) | 21 / 21 km/h |
| Tyres | Superelastic |
| Overall length | 3,702 mm |
| Overall width | 1,199 mm |
| Overhead guard height | 2,190 mm |
| Fork dimensions (s × e × l) | 50 × 100 × 1,000 mm |
| Turning radius | 2,384 mm |
| Service weight | 4,362 kg |
Figures refer to the standard configuration in the manufacturer datasheet. Masts, batteries and options change some values; we confirm the exact specification with you before quoting.
STILL RX 70-30 in detail
Other models in the range
RX 70-16
- Load capacity
- 1.6 t
- Lift height
- 3,230 mm
- Engine
- VW BXT
RX 70-20
- Load capacity
- 2 t
- Lift height
- 3,150 mm
- Engine
- VW BXT
RX 70-25
- Load capacity
- 2.5 t
- Lift height
- 2,970 mm
- Engine
- STILL DM02VB
RC 42-30
- Load capacity
- 3 t
- Lift height
- 3,300 / 4,700 mm
- Engine
- Mitsubishi S4S
RX 70-40
- Load capacity
- 4 t
- Lift height
- 3,180 mm
- Engine
- Deutz TCD 2.9 L4
RX 70-50
- Load capacity
- 5 t
- Lift height
- 3,180 mm
- Engine
- Deutz TCD 2.9 L4
RX 70-70
- Load capacity
- 7 t
- Lift height
- 3,150 mm
- Engine
- Deutz TCD 4.1
RX 70-80
- Load capacity
- 8 t
- Lift height
- 3,150 mm
- Engine
- Deutz TCD 4.1
Interested in the STILL RX 70-30?
Tell us about your loads, lift heights and shift pattern. We will propose the right configuration for purchase, rental or a full-service agreement.
Request a Quote