STILL RX 70-25
STILL RX 70-25
A 2.5-tonne diesel forklift with a 45 kW STILL engine meeting EU Stage V, built for outdoor and mixed-use work on long shifts.
- 2.5 t at 500 mm load centre
- 45 kW STILL DM02VB diesel
- 2,970 mm standard lift
- EU Stage V engine
More power for everyday diesel handling
The RX 70-25 moves up to STILL’s own 2.4-litre DM02VB diesel engine, rated at 45 kW and certified to EU Stage V. It carries 2,500 kg at a 500 mm load centre on 40 × 100 × 1,000 mm forks, drives through a diesel-electric transmission and reaches 21 km/h. The standard telescopic mast lifts 2,970 mm from a lowered height of 2,175 mm, while HiLo and triplex masts are listed up to 7,390 mm.
With an overall length of 3,607 mm, a width of 1,199 mm and a 2,270 mm turning radius, the truck suits yards and loading areas where 2.5-tonne loads are routine. The service brake is electrical/hydraulic, the tyres are superelastic and the service weight is 4,009 kg. An LPG model, the RX 70-25 T with a STILL PM02V engine, is also available. We can compare both options against your operating hours and site.
- 45 kW STILL engine: 2.4-litre DM02VB, EU Stage V.
- 2.5 t capacity: 40 × 100 × 1,000 mm forks as standard.
- Mast choice: 2,970 mm standard lift, triplex masts up to 7,390 mm.
Why choose the RX 70-25
Practical points taken from the VDI 2198 datasheet.
Stage V diesel
The DM02VB engine meets EU Regulation 2016/1628 Stage V.
Diesel-electric drive
Electric traction fed by the diesel engine, with an electrical/hydraulic service brake.
Workable dimensions
3,607 mm long and 1,199 mm wide, with a 3,924 mm working aisle for 1,000 × 1,200 pallets crossways.
Diesel or LPG
The RX 70-25 T runs on LPG with a 36 kW STILL PM02V engine.
STILL RX 70-25 at a glance
| Specification | STILL RX 70-25 |
|---|---|
| Load capacity | 2,500 kg |
| Load centre | 500 mm |
| Drive | Diesel |
| Engine | STILL DM02VB |
| Engine power | 45 kW |
| Lift height | 2,970 mm (up to 7,390 mm with triplex mast) |
| Travel speed (laden / unladen) | 21 / 21 km/h |
| Tyres | Superelastic |
| Overall length | 3,607 mm |
| Overall width | 1,199 mm |
| Overhead guard height | 2,190 mm |
| Fork dimensions (s × e × l) | 40 × 100 × 1,000 mm |
| Turning radius | 2,270 mm |
| Service weight | 4,009 kg |
Figures refer to the standard configuration in the manufacturer datasheet. Masts, batteries and options change some values; we confirm the exact specification with you before quoting.
STILL RX 70-25 in detail
Other models in the range
RX 70-16
- Load capacity
- 1.6 t
- Lift height
- 3,230 mm
- Engine
- VW BXT
RX 70-20
- Load capacity
- 2 t
- Lift height
- 3,150 mm
- Engine
- VW BXT
RC 42-30
- Load capacity
- 3 t
- Lift height
- 3,300 / 4,700 mm
- Engine
- Mitsubishi S4S
RX 70-30
- Load capacity
- 3 t
- Lift height
- 2,970 mm
- Engine
- STILL DM02VB
RX 70-40
- Load capacity
- 4 t
- Lift height
- 3,180 mm
- Engine
- Deutz TCD 2.9 L4
RX 70-50
- Load capacity
- 5 t
- Lift height
- 3,180 mm
- Engine
- Deutz TCD 2.9 L4
RX 70-70
- Load capacity
- 7 t
- Lift height
- 3,150 mm
- Engine
- Deutz TCD 4.1
RX 70-80
- Load capacity
- 8 t
- Lift height
- 3,150 mm
- Engine
- Deutz TCD 4.1
Interested in the STILL RX 70-25?
Tell us about your loads, lift heights and shift pattern. We will propose the right configuration for purchase, rental or a full-service agreement.
Request a Quote